Cement mixer is a small helper often met in the construction industry, because the work efficiency and quality of cement mixer are very good, and also help us save time to do other things

水泥攪拌車的主要結構有哪些：

What are the main structures of cement mixer truck

水泥攪拌車主要由汽車底盤、攪拌筒、傳動系統、供水裝置等部分組成。由于技術瓶頸，國產攪拌車的四大件液壓馬達、變量柱塞泵、減速機、冷卻器全部為進口部件。

Cement mixing truck is mainly composed of chassis, mixing drum, transmission system, water supply device, etc. Due to the technical bottleneck, the hydraulic motor, variable piston pump, reducer and cooler of domestic mixer are all imported parts.

水泥攪拌車組成：二類底盤、傳動系、液壓系統、機架、攪拌罐、進出料裝置、供水系統、操縱系、人梯等部分。攪拌罐前端與減速機聯接安裝在機架前臺上，后端通過滾道由安裝在機架后臺的兩個托輪支撐。

Cement mixer truck consists of class II chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, ladder, etc. The front end of the mixing tank is connected with the reducer and installed on the front stage of the frame, and the rear end is supported by two supporting wheels installed on the back stage of the frame through the raceway.

我們都知道汽車的車架在輪胎上，并且輪胎與地面接觸。 換句話說，要判斷道路是否可以通過，主要取決于輪距是否在道路寬度內。 因此，我們也知道水泥攪拌機的環境適應性不僅受到發動機的影響，還受到輪距的影響。 那么我們自然就會知道，小型混凝土攪拌機的輪距的選擇非常重要。

We all know that the frame of a car is on the tire and the tire is in contact with the ground. In other words, whether the road can pass depends on whether the track width is within the road width. Therefore, we also know that the environmental adaptability of cement mixer is not only affected by the engine, but also affected by the wheelbase. Then we will naturally know that the selection of the track of small concrete mixer is very important.

其次，輪距和車框架之間的匹配也非常重要。 因為上面我們說過，汽車的框架位于輪胎的頂部。 然后，合理的輪距框架必須在合理的軸承范圍內。 如所謂的量身定制，用于汽車的衣服就是汽車的車架。 如果不合理地剪了衣服，那不僅對汽車不利。 這也是某些模型易于側翻的原因-汽車的框架太大，輪距太小并且太高。 不言而喻。

Secondly, the matching between the track and the frame is also very important. Because as we said above, the frame of the car is at the top of the tire. Then, a reasonable track frame must be within a reasonable bearing range. Such as the so-called tailor-made, for the car's clothing is the car frame. If you cut clothes unreasonably, it's not only bad for cars. This is also the reason why some models are prone to rollover - the frame of the car is too large, the track is too small and the center of gravity is too high. It goes without saying.